Glasair 3 Series

General information about Glasair 3

The Glasair 3 is an American aircraft of the company Stoddard-Hamilton Aircraft. It is a two-seater with a dual control, which was designed and built in Washington. The machine is for amateur construction and 402 pieces of the model have been built so far. The Glasair 3 is a cantilever low-wing aircraft with a retractable landing gear. In addition, the machine has a double control. The aircraft can be equipped with wing tip fuel tanks.

Technical data for the Glasair 3 series

It can carry two people, the pilot is included. The machine is 6.50 meters long and 2.18 meters high. The span is 7.09 meters, with a wing area of 7.55 square meters. The Glasair 3 has a empty weight of 703 kilograms and a maximum takeoff weight of 1,089 kilograms. The aircraft is powered by a Lycoming IO-540-K1H5 engine with 224 kilowatts of power. The top speed is 467 kilometers per hour and the cruising speed is reduced to 454 kilometers per hour. The range is 2,092 kilometers and the maximal service ceiling touches at 7,315 meters altitude.

Products and services for the Glasair 3 series

For us the best is just good enough! This is not just a slogan, but our motto. We are passionate pilots as well and excellently know each other in the field of aviation. That's why we have a wide range of services. Because only a well-maintained plane is safe. Therefore, we gladly carry out a maintenance on your Glasair 3. We also do weighings, hourly checks, test flights and much more. But you have special wishes regarding your machine? No problem, please contact us, we are also happy to special requests.

Teaser Contact@2X

Make a date?

Porta Air Service contact
Porta Air Service GmbH & Co KG • Flughafen 9
D-32457 Porta Westfalica • Germany